MPV3 - Multi-functional type Vacuum Switching Valve
MPV3 is most suitable for suction and transfer system with vacuum line and vacuum pumps. Pressuresensor and break functions are installed.
Up to eight manifolds are available.
MVS-201, sensor with solenoid valves control can be installed.
MPV4 is 10 width slim type of vacuum switching.
MPV4 is compact (one-fourth of volume as compared with our original MPV3 with
3 switching valves) and light weight (54g).
High speed suction and transfer is possible with MPV4 directly installed on
the heads of chip mounters and test equipments.
MPV4 is designed for sharing the same main body with MC4 and ejector/switching
valve can be selected on the same space.
MPV5 is small vacuum switching valve with 10mm width main body.
Tow types are available: type with the control needle for the amount of vacuum
break and type with atmospheric pressure induction system installed.
Up to ten manifolds are available and the control needle for the amount of
vacuum break needs to be installed respectively.
Type with atmospheric pressure induction system makes it possible to preserve
even the minute work by inducting atmospheric pressure into the side of vacuum
sunction at one time (by releasing atmosperic pressure) in the case of breaking
vacuum under the condition of vacuum suction.
MPV6 - Vacuum Switching Valve for Clean Room
MPV6 can discharge vaccum break air under the clean condition.
Inside of main unit is installed with flter (0.01,,m).
Vacuum switching control is with the equipment to keep the vacuum by using double solenoid valve.
Centralized exhaust specificatiions.
Cyber pump, rotary wing type is small, light, quiet, and compact.
Simple system CCP can be easily installed without large space, which contriibutes
to save space.
Vibration, pulsation and noise are little. Installation on the base is possible
without any troublesome piping work.
Four types of cyber pumps (dfferent exhaust amount) are available.
VTE is small and dry running rotary wing type of vacuum pump.
VTE is compact and can easily be built in the machine.
Noise is very little.
Hose connecting exit and exhaust silencer are installed.
Motor is made in Jermany in accordance with DIN/VDE0530.
VLT - Rotar Vacuum Pump
VLT is dry running rotary wing type vacuum pump with paper-made suction
filter built-in.
Noise cover makes noise level remarkably low, enhances cooling effect,
and protects over-heated surface.
VLT is designed to be flexibly connected and to be protected from vibration.
VLT is also designed to be easily operated, conserved and built-in.
Motor is made in Jermany in accordance with DIN/VDE0530.
Application:
Copyright 2002-2017 Shanghai Full year Internationl Trading Co., Ltd. All Rights Reserved
滬公網(wǎng)安備 31011502002885號(hào)